Skip to main content

Boot Winxp Fast

Follow the following steps

1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. From the Start menu, select "Run..." & type "devmgmt.msc".
7. Double click on "IDE ATA/ATAPI controllers"
8. Right click on "Primary IDE Channel" and select "Properties".
9. Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11. Reboot your computer.

Comments

Post a Comment

Popular posts from this blog

Maxon Cinema 4D Studio R13.058 full Keygen Cracked Version | Mediafire Torrent Download Link

Download Maxon CINEMA 4D Studio Full Version With Keygen -Everything You Need for High-End 3D 32 and 64 bit MAXON CINEMA 4D STUDIO R13.058 (x86/x64) CINEMA 4D Studio is the very best that MAXON has to offer for professional 3D artists. If you want to create advanced 3D graphics but need a helping hand to ensure you create jaw-dropping graphics quickly and easily, then this is the choice for you.                     All You Ever Wanted This is our top-of-the-line product. It not only contains everything the other CINEMA 4D versions offer - it goes far beyond. CINEMA 4D Studio has all the tools you need to tackle even the most complex project. Minimum System Requirements Windows XP, Vista or 7 running on Intel or AMD CPU with SSE2-Support; Mac OS X 10.5.8 or higher running on an Intel-based Mac; 1024 MB free RAM, DVD ROM drive. Standard DVD installation can take up to 4 GB of disk space. Software must be registered for permanent use. SUPPORTED OPERATING SYS
2 comments
Read more

C Program to add two matrices using pointers.

  #include<stdio.h> main() { int a[5][5],b[5][5],c[5][5],i,j,m,n; printf("\n Enter the Dimension of the Matrix:\n"); scanf("%d%d",&m,&n); printf("\nEnter the Elements of the first matix:"); for(i=0;i<m;i++) { for(j=0;j<n;j++) { scanf("%d",(*(a+i)+j)); } } printf("\nEnter the elements of the second matrix:\n"); for(i=0;i<m;i++) { for(j=0;j<n;j++) { scanf("%d",(*(b+i)+j)); } } for(i=0;i<m;i++) { for(j=0;j<n;j++) { *(*(c+i)+j)=*(*(a+i)+j)+ *(*(b+i)+j); } } printf("\nResultantMatrix:\n"); for(i=0;i<m;i++) { for(j=0;j<n;j++) { printf("%5d",*(*(c+i)+j)); } printf("\n"); } getch(); } Output:  Enter the Dimension of the Matrix: 2  2 Enter the Elements of the first matix: 1   2   3   4 Enter the elements of the second matrix: 9   8   7  6 ResultantMatrix:  
Post a Comment
Read more

C Program to create a Teapot using OpenGL

  C Program to create a Teapot using OpenGL # include <stdio.h> # include <GL/glut.h> void wall ( double thickness ) { glPushMatrix ( ) ; glTranslated ( 0.5 , 0.5 * thickness , 0.5 ) ; glScaled ( 1.0 , thickness , 1.0 ) ; glutSolidCube ( 1.0 ) ; glPopMatrix ( ) ; } void tableLeg ( double thick , double len ) { glPushMatrix ( ) ; glTranslated ( 0 , len / 2 , 0 ) ; glScaled ( thick , len , thick ) ; glutSolidCube ( 1.0 ) ; glPopMatrix ( ) ; } void table ( double topWid , double topThick , double legThick , double legLen ) { glPushMatrix ( ) ; glTranslated ( 0 , legLen , 0 ) ; glScaled ( topWid , topThick , topWid ) ; glutSolidCube ( 1.0 ) ; glPopMatrix ( ) ; double dist = 0.95 * topWid / 2.0 - legThick / 2.0 ; glPushMatrix ( ) ; glTranslated ( dist , 0 , dist ) ; tableLeg ( legThick , legLen ) ; glTranslated ( 0.0 , 0.0 , - 2 * dist ) ; tableLeg ( legThick , legLen ) ; glTransla
Post a Comment
Read more